Selected ATcT [1, 2] enthalpy of formation based on version 1.176 of the Thermochemical Network [3]This version of ATcT results[3] was generated by additional expansion of version 1.172 to include species related to Criegee intermediates that are involved in several ongoing studies[4].
|
Hydrogen bromide |
Formula: HBr (aq, 1 H2O) |
CAS RN: 10035-10-6 |
ATcT ID: 10035-10-6*801 |
SMILES: Br |
InChI: InChI=1S/BrH/h1H |
InChIKey: CPELXLSAUQHCOX-UHFFFAOYSA-N |
Hills Formula: Br1H1 |
2D Image: |
|
Aliases: HBr; Hydrogen bromide; Hydrogen monobromide; Hydrobromic acid; Bromhydric acid; Bromohydric acid; Bromohydrogen; Bromic acid; Bromine hydride; Bromine monohydride; UN 1048; UN 1788 |
Relative Molecular Mass: 80.9119 ± 0.0010 |
ΔfH°(0 K) | ΔfH°(298.15 K) | Uncertainty | Units |
---|
| -71.67 | ± 0.13 | kJ/mol |
|
Top contributors to the provenance of ΔfH° of HBr (aq, 1 H2O)The 20 contributors listed below account only for 75.2% of the provenance of ΔfH° of HBr (aq, 1 H2O). A total of 89 contributors would be needed to account for 90% of the provenance.
Please note: The list is limited to 20 most important contributors or, if less, a number sufficient to account for 90% of the provenance. The Reference acts as a further link to the relevant references and notes for the measurement. The Measured Quantity is normaly given in the original units; in cases where we have reinterpreted the original measurement, the listed value may differ from that given by the authors. The quoted uncertainty is the a priori uncertainty used as input when constructing the initial Thermochemical Network, and corresponds either to the value proposed by the original authors or to our estimate; if an additional multiplier is given in parentheses immediately after the prior uncertainty, it corresponds to the factor by which the prior uncertainty needed to be multiplied during the ATcT analysis in order to make that particular measurement consistent with the prevailing knowledge contained in the Thermochemical Network.
|
Contribution (%) | TN ID | Reaction | Measured Quantity | Reference | 21.1 | 9678.1 | S(O)(OH)2 (aq, 2500 H2O) + Br2 (cr,l) + H2O (cr,l) → OS(O)(OH)2 (aq, 2500 H2O) + 2 HBr (aq, 1250 H2O)  | ΔrH°(298.15 K) = -55.47 ± 0.11 kcal/mol | Johnson 1963 | 11.0 | 1209.1 | [HBr]+ (g) → H (g) + Br+ (g)  | ΔrH°(0 K) = 31394.5 ± 20 cm-1 | Haugh 1971, Norling 1935 | 10.6 | 1143.1 | HBr (aq, 1 H2O) → HBr (aq, 3000 H2O)  | ΔrH°(298.15 K) = -48.59 ± 0.040 kJ/mol | NBS Tables 1989, Parker 1965, NBS TN270 | 8.9 | 1108.2 | Br2 (cr,l) → Br2 (g)  | ΔrH°(298.15 K) = 7.386 ± 0.027 kcal/mol | Hildenbrand 1958 | 6.5 | 1138.1 | HBr (g) → HBr (aq, 2570 H2O)  | ΔrH°(298.15 K) = -20.286 ± 0.012 kcal/mol | Vanderzee 1963 | 2.1 | 1209.3 | [HBr]+ (g) → H (g) + Br+ (g)  | ΔrH°(0 K) = 31358 ± 15 (×3.018) cm-1 | Penno 1998, Norling 1935, est unc | 1.8 | 1135.1 | 1/2 H2 (g) + 1/2 Br2 (cr,l) → HBr (aq)  | ΔrG°(298.15 K) = -102.81 ± 0.80 kJ/mol | Jones 1934, as quoted by CODATA Key Vals | 1.5 | 1199.1 | Cl2 (g) + 2 Br- (aq) → Br2 (cr,l) + 2 Cl- (aq)  | ΔrH°(298.15 K) = -91.29 ± 0.40 (×4.269) kJ/mol | Johnson 1963, as quoted by CODATA Key Vals | 1.5 | 1199.2 | Cl2 (g) + 2 Br- (aq) → Br2 (cr,l) + 2 Cl- (aq)  | ΔrH°(298.15 K) = -91.29 ± 0.80 (×2.134) kJ/mol | Sunner 1964, as quoted by CODATA Key Vals | 1.1 | 1199.3 | Cl2 (g) + 2 Br- (aq) → Br2 (cr,l) + 2 Cl- (aq)  | ΔrH°(298.15 K) = -91.55 ± 2.00 kJ/mol | Thomsen 1882, as quoted by CODATA Key Vals | 1.1 | 1356.1 | Br2 (cr,l) + 3 I- (aq) → [I3]- (aq) + 2 Br- (aq)  | ΔrH°(298.15 K) = -29.355 ± 0.364 kcal/mol | Wu 1963 | 1.0 | 6290.1 | CH3Br (g) → [CH3]+ (g) + Br (g)  | ΔrH°(0 K) = 12.834 ± 0.002 (×2.828) eV | Song 2001 | 0.9 | 3106.2 | HCO (g) + HBr (g) → CH2O (g) + Br (g)  | ΔrG°(385 K) = 6.79 ± 0.64 (×1.297) kJ/mol | Becerra 1997, Nava 1981, 3rd Law, note unc | 0.9 | 1126.12 | HBr (g) → H (g) + Br (g)  | ΔrH°(0 K) = 86.47 ± 0.2 kcal/mol | Feller 2008 | 0.9 | 1127.6 | HBr (g) + Cl (g) → HCl (g) + Br (g)  | ΔrH°(0 K) = -15.68 ± 0.2 kcal/mol | Feller 2008 | 0.8 | 1300.1 | HI (g) + Br (g) → HBr (g) + I (g)  | ΔrH°(0 K) = -16.14 ± 0.2 kcal/mol | Feller 2008 | 0.7 | 6621.1 | CH3CH2Br (g) → [CH3CH2]+ (g) + Br (g)  | ΔrH°(0 K) = 11.130 ± 0.005 eV | Baer 2000 | 0.7 | 6292.3 | CH3Br (g) + HBr (g) → Br2 (g) + CH4 (g)  | ΔrG°(712.2 K) = 35.8 ± 1.6 kJ/mol | Ferguson 1973, 3rd Law | 0.6 | 2402.1 | CH4 (g) + Br (g) → CH3 (g) + HBr (g)  | ΔrH°(0 K) = 5929 ± 80 cm-1 | Czako 2013 | 0.6 | 2049.2 | [ON(O)O]- (g) + HBr (g) → Br- (g) + HON(O)O (g)  | ΔrH°(391 K) = -1.03 ± 0.21 kcal/mol | Davidson 1977, 2nd Law |
|
Top 10 species with enthalpies of formation correlated to the ΔfH° of HBr (aq, 1 H2O) |
Please note: The correlation coefficients are obtained by renormalizing the off-diagonal elements of the covariance matrix by the corresponding variances. The correlation coefficient is a number from -1 to 1, with 1 representing perfectly correlated species, -1 representing perfectly anti-correlated species, and 0 representing perfectly uncorrelated species.
|
Correlation Coefficent (%) | Species Name | Formula | Image | ΔfH°(0 K) | ΔfH°(298.15 K) | Uncertainty | Units | Relative Molecular Mass | ATcT ID | 94.5 | Hydrogen bromide | HBr (aq, 3000 H2O) | | | -120.26 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*842 | 94.4 | Hydrogen bromide | HBr (aq, 40 H2O) | | | -118.91 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*821 | 94.4 | Hydrogen bromide | HBr (aq, 700 H2O) | | | -120.04 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*835 | 94.4 | Hydrogen bromide | HBr (aq, 30 H2O) | | | -118.59 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*820 | 94.4 | Hydrogen bromide | HBr (aq, 20 H2O) | | | -118.02 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*818 | 94.4 | Hydrogen bromide | HBr (aq, 100000 H2O) | | | -120.44 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*861 | 94.4 | Hydrogen bromide | HBr (aq, 500 H2O) | | | -119.97 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*833 | 94.4 | Hydrogen bromide | HBr (aq, 400 H2O) | | | -119.93 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*832 | 94.4 | Hydrogen bromide | HBr (aq, 5 H2O) | | | -110.69 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*809 | 94.4 | Hydrogen bromide | HBr (aq, 800 H2O) | | | -120.07 | ± 0.12 | kJ/mol | 80.9119 ± 0.0010 | 10035-10-6*837 |
|
Most Influential reactions involving HBr (aq, 1 H2O)Please note: The list, which is based on a hat (projection) matrix analysis, is limited to no more than 20 largest influences.
|
|
|
References
|
1
|
|
B. Ruscic, R. E. Pinzon, M. L. Morton, G. von Laszewski, S. Bittner, S. G. Nijsure, K. A. Amin, M. Minkoff, and A. F. Wagner,
Introduction to Active Thermochemical Tables: Several "Key" Enthalpies of Formation Revisited.
J. Phys. Chem. A 108, 9979-9997 (2004)
[DOI: 10.1021/jp047912y]
|
2
|
|
B. Ruscic, R. E. Pinzon, G. von Laszewski, D. Kodeboyina, A. Burcat, D. Leahy, D. Montoya, and A. F. Wagner,
Active Thermochemical Tables: Thermochemistry for the 21st Century.
J. Phys. Conf. Ser. 16, 561-570 (2005)
[DOI: 10.1088/1742-6596/16/1/078]
|
3
|
|
B. Ruscic and D. H. Bross, Active Thermochemical Tables (ATcT) values based on ver. 1.176 of the Thermochemical Network (2024); available at ATcT.anl.gov |
4
|
|
T. L. Nguyen et al, ongoing studies (2024)
|
5
|
|
B. Ruscic,
Uncertainty Quantification in Thermochemistry, Benchmarking Electronic Structure Computations, and Active Thermochemical Tables.
Int. J. Quantum Chem. 114, 1097-1101 (2014)
[DOI: 10.1002/qua.24605]
|
6
|
|
B. Ruscic and D. H. Bross,
Thermochemistry
Computer Aided Chem. Eng. 45, 3-114 (2019)
[DOI: 10.1016/B978-0-444-64087-1.00001-2]
|
|
|
Formula
|
The aggregate state is given in parentheses following the formula, such as: g - gas-phase, cr - crystal, l - liquid, etc.
|
|
Uncertainties
|
The listed uncertainties correspond to estimated 95% confidence limits, as customary in thermochemistry (see, for example, Ruscic [5] and Ruscic and Bross[6]).
Note that an uncertainty of ± 0.000 kJ/mol indicates that the estimated uncertainty is < ± 0.0005 kJ/mol.
|
|
Website Functionality Credits
|
The reorganization of the website was developed and implemented by David H. Bross (ANL).
The find function is based on the complete Species Dictionary entries for the appropriate version of the ATcT TN.
The molecule images are rendered by Indigo-depict.
The XYZ renderings are based on Jmol: an open-source Java viewer for chemical structures in 3D. http://www.jmol.org/.
|
|
Acknowledgement
|
This work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences under Contract No. DE-AC02-06CH11357.
|