Selected ATcT [1, 2] enthalpy of formation based on version 1.176 of the Thermochemical Network [3]

This version of ATcT results[3] was generated by additional expansion of version 1.172 to include species related to Criegee intermediates that are involved in several ongoing studies[4].

Diazenide

Formula: [NNH]- (g)
CAS RN: 71004-29-0
ATcT ID: 71004-29-0*0
SMILES: N#N.[H-]
InChI: InChI=1S/N2.H/c1-2;/q;-1
InChIKey: JIQVZIXRRQCIGD-UHFFFAOYSA-N
SMILES: N=[N-]
InChI: InChI=1S/HN2/c1-2/h1H/q-1
InChIKey: XSCXGOPPNHTWEF-UHFFFAOYSA-N
Hills Formula: H1N2-

2D Image:

N#N.[H-]
Aliases: [NNH]-; Diazenide; Diazene ion; Diazene anion; Diazene ion (1-)
Relative Molecular Mass: 29.02197 ± 0.00016

   ΔfH°(0 K)   ΔfH°(298.15 K)UncertaintyUnits
175.6176.7± 1.6kJ/mol

3D Image of [NNH]- (g)

spin ON           spin OFF
          

Top contributors to the provenance of ΔfH° of [NNH]- (g)

The 20 contributors listed below account only for 89.9% of the provenance of ΔfH° of [NNH]- (g).
A total of 21 contributors would be needed to account for 90% of the provenance.

Please note: The list is limited to 20 most important contributors or, if less, a number sufficient to account for 90% of the provenance. The Reference acts as a further link to the relevant references and notes for the measurement. The Measured Quantity is normaly given in the original units; in cases where we have reinterpreted the original measurement, the listed value may differ from that given by the authors. The quoted uncertainty is the a priori uncertainty used as input when constructing the initial Thermochemical Network, and corresponds either to the value proposed by the original authors or to our estimate; if an additional multiplier is given in parentheses immediately after the prior uncertainty, it corresponds to the factor by which the prior uncertainty needed to be multiplied during the ATcT analysis in order to make that particular measurement consistent with the prevailing knowledge contained in the Thermochemical Network.

Contribution
(%)
TN
ID
Reaction Measured Quantity Reference
10.21873.8 [NNH]- (g, vdW) → NNH (g) ΔrH°(0 K) = 0.808 ± 0.050 eVRuscic W1RO
9.51885.8 [NNH]- (g, vdW) → [NNH]+ (g) ΔrH°(0 K) = 9.007 ± 0.050 eVRuscic W1RO
6.81873.4 [NNH]- (g, vdW) → NNH (g) ΔrH°(0 K) = 0.747 ± 0.061 eVRuscic G4
6.41876.8 [NNH]- (g, vdW) → 2 N (g) H (g) ΔrH°(0 K) = 234.80 ± 1.50 kcal/molRuscic W1RO
6.11885.4 [NNH]- (g, vdW) → [NNH]+ (g) ΔrH°(0 K) = 8.924 ± 0.061 (×1.022) eVRuscic G4
5.61876.7 [NNH]- (g, vdW) → 2 N (g) H (g) ΔrH°(0 K) = 234.12 ± 1.60 kcal/molRuscic CBS-n
5.61876.4 [NNH]- (g, vdW) → 2 N (g) H (g) ΔrH°(0 K) = 233.52 ± 1.60 kcal/molRuscic G4
4.81876.3 [NNH]- (g, vdW) → 2 N (g) H (g) ΔrH°(0 K) = 234.49 ± 1.72 kcal/molRuscic G3X
4.51887.5 [NNH]- (g, vdW) → [NNH]- (g, triplet) ΔrH°(0 K) = 14282 ± 420 cm-1Ruscic W1RO
3.91887.2 [NNH]- (g, vdW) → [NNH]- (g, triplet) ΔrH°(0 K) = 14043 ± 450 cm-1Ruscic G4
3.81887.4 [NNH]- (g, vdW) → [NNH]- (g, triplet) ΔrH°(0 K) = 14420 ± 455 cm-1Ruscic CBS-n
3.51873.3 [NNH]- (g, vdW) → NNH (g) ΔrH°(0 K) = 0.801 ± 0.085 eVRuscic G3X
3.31887.1 [NNH]- (g, vdW) → [NNH]- (g, triplet) ΔrH°(0 K) = 14566 ± 490 cm-1Ruscic G3X
3.31885.3 [NNH]- (g, vdW) → [NNH]+ (g) ΔrH°(0 K) = 8.997 ± 0.085 eVRuscic G3X
3.11873.7 [NNH]- (g, vdW) → NNH (g) ΔrH°(0 K) = 0.795 ± 0.090 eVRuscic CBS-n
2.91885.7 [NNH]- (g, vdW) → [NNH]+ (g) ΔrH°(0 K) = 8.990 ± 0.090 eVRuscic CBS-n
1.81873.6 [NNH]- (g, vdW) → NNH (g) ΔrH°(0 K) = 0.909 ± 0.092 (×1.269) eVRuscic CBS-n
1.71876.6 [NNH]- (g, vdW) → 2 N (g) H (g) ΔrH°(0 K) = 237.41 ± 2.16 (×1.325) kcal/molRuscic CBS-n
1.01885.6 [NNH]- (g, vdW) → [NNH]+ (g) ΔrH°(0 K) = 9.133 ± 0.092 (×1.61) eVRuscic CBS-n
0.91874.5 [NNH]- (g, triplet) → NNH (g) ΔrH°(0 K) = -0.962 ± 0.050 eVRuscic W1RO

Top 10 species with enthalpies of formation correlated to the ΔfH° of [NNH]- (g)

Please note: The correlation coefficients are obtained by renormalizing the off-diagonal elements of the covariance matrix by the corresponding variances.
The correlation coefficient is a number from -1 to 1, with 1 representing perfectly correlated species, -1 representing perfectly anti-correlated species, and 0 representing perfectly uncorrelated species.


Correlation
Coefficent
(%)
Species Name Formula Image    ΔfH°(0 K)    ΔfH°(298.15 K) Uncertainty Units Relative
Molecular
Mass
ATcT ID
100.0 Diazenide[NNH]- (g, vdW)N#N.[H-]175.6176.7± 1.6kJ/mol29.02197 ±
0.00016
71004-29-0*100
33.2 Diazenide[NNH]- (g, triplet)N#N.[H-]347.5344.6± 1.6kJ/mol29.02197 ±
0.00016
71004-29-0*1
15.0 Diazynium[NNH]+ (g)N#[NH+]1042.571038.96± 0.67kJ/mol29.02087 ±
0.00016
12357-66-3*0
11.2 Xenonium[XeH]+ (g)[Xe+2][H-]1038.191036.42± 0.88kJ/mol132.2974 ±
0.0200
37276-91-8*0
10.9 DiazenylNNH (g)[N]=N252.16249.24± 0.45kJ/mol29.02142 ±
0.00016
36882-13-0*0
2.4 DiazeneHNNH (g, trans-cis equilib)N=N207.17200.03± 0.40kJ/mol30.02936 ±
0.00020
3618-05-1*1
2.4 DiazeneHNNH (g, trans-cis-iso equilib)N=N207.17200.03± 0.40kJ/mol30.02936 ±
0.00020
3618-05-1*0
2.4 (E)-DiazeneHNNH (g, trans)[H]/N=N/[H]207.17200.03± 0.40kJ/mol30.02936 ±
0.00020
15626-43-4*0
1.6 Hydroxyoxomethylium[HOCO]+ (g)O[C+]=O600.69597.60± 0.43kJ/mol45.0169 ±
0.0010
638-71-1*0
1.5 Methanium[CH5]+ (g)[CH5+]921.99911.75± 0.44kJ/mol17.04985 ±
0.00087
15135-49-6*0

Most Influential reactions involving [NNH]- (g)

Please note: The list, which is based on a hat (projection) matrix analysis, is limited to no more than 20 largest influences.

Influence
Coefficient
TN
ID
Reaction Measured Quantity Reference
1.0001888.1 [NNH]- (g) → [NNH]- (g, vdW) ΔrH°(0 K) = 0 ± 0 cm-1Ruscic W1RO, Ruscic G4, Ruscic CBS-n


References
1   B. Ruscic, R. E. Pinzon, M. L. Morton, G. von Laszewski, S. Bittner, S. G. Nijsure, K. A. Amin, M. Minkoff, and A. F. Wagner,
Introduction to Active Thermochemical Tables: Several "Key" Enthalpies of Formation Revisited.
J. Phys. Chem. A 108, 9979-9997 (2004) [DOI: 10.1021/jp047912y]
2   B. Ruscic, R. E. Pinzon, G. von Laszewski, D. Kodeboyina, A. Burcat, D. Leahy, D. Montoya, and A. F. Wagner,
Active Thermochemical Tables: Thermochemistry for the 21st Century.
J. Phys. Conf. Ser. 16, 561-570 (2005) [DOI: 10.1088/1742-6596/16/1/078]
3   B. Ruscic and D. H. Bross,
Active Thermochemical Tables (ATcT) values based on ver. 1.176 of the Thermochemical Network (2024); available at ATcT.anl.gov
4   T. L. Nguyen et al, ongoing studies (2024)
5   B. Ruscic,
Uncertainty Quantification in Thermochemistry, Benchmarking Electronic Structure Computations, and Active Thermochemical Tables.
Int. J. Quantum Chem. 114, 1097-1101 (2014) [DOI: 10.1002/qua.24605]
6   B. Ruscic and D. H. Bross,
Thermochemistry
Computer Aided Chem. Eng. 45, 3-114 (2019) [DOI: 10.1016/B978-0-444-64087-1.00001-2]

Formula
The aggregate state is given in parentheses following the formula, such as: g - gas-phase, cr - crystal, l - liquid, etc.

Uncertainties
The listed uncertainties correspond to estimated 95% confidence limits, as customary in thermochemistry (see, for example, Ruscic [5] and Ruscic and Bross[6]).
Note that an uncertainty of ± 0.000 kJ/mol indicates that the estimated uncertainty is < ± 0.0005 kJ/mol.

Website Functionality Credits
The reorganization of the website was developed and implemented by David H. Bross (ANL).
The find function is based on the complete Species Dictionary entries for the appropriate version of the ATcT TN.
The molecule images are rendered by Indigo-depict.
The XYZ renderings are based on Jmol: an open-source Java viewer for chemical structures in 3D. http://www.jmol.org/.

Acknowledgement
This work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences under Contract No. DE-AC02-06CH11357.