Selected ATcT [1, 2] enthalpy of formation based on version 1.172 of the Thermochemical Network [3]

This version of ATcT results[3] was generated by additional expansion of version 1.156 to include species relevant to a study of photodissociation of formamide[4].

Sulfanylium

Formula: [SH]+ (g)
CAS RN: 12273-42-6
ATcT ID: 12273-42-6*0
SMILES: [SH+]
InChI: InChI=1S/HS/h1H/q+1
InChIKey: GSVBMMRCPHEJKN-UHFFFAOYSA-N
Hills Formula: H1S1+

2D Image:

[SH+]
Aliases: [SH]+; Sulfanylium; Sulfoniumylidene; Sulfoniumylidene ion; Sulfoniumylidene cation; Sulfoniumylidene ion (1+); Mercapto cation; Mercapto ion (1+); Sulfide cation; Sulfide ion (1+); Thiohydroxyl cation; Thiohydroxyl ion (1+); Sulfhydryl cation; Sulfhydryl ion (1+); Hydrogen monosulfide cation; Hydrogen monosulfide ion (1+); Monohydrogen sulfide cation; Monohydrogen sulfide ion (1+); Monohydrogen monosulfide cation; Monohydrogen monosulfide ion (1+); Hydrogen sulfide cation; Hydrogen sulfide ion (1+); Sulfur monohydride cation; Sulfur monohydride ion (1+); Sulfur hydride cation; Sulfur hydride ion (1+); Hydrosulfur cation; Hydrosulfur ion (1+)
Relative Molecular Mass: 33.0734 ± 0.0060

   ΔfH°(0 K)   ΔfH°(298.15 K)UncertaintyUnits
1148.361148.36± 0.19kJ/mol

3D Image of [SH]+ (g)

spin ON           spin OFF
          

Top contributors to the provenance of ΔfH° of [SH]+ (g)

The 20 contributors listed below account only for 86.0% of the provenance of ΔfH° of [SH]+ (g).
A total of 25 contributors would be needed to account for 90% of the provenance.

Please note: The list is limited to 20 most important contributors or, if less, a number sufficient to account for 90% of the provenance. The Reference acts as a further link to the relevant references and notes for the measurement. The Measured Quantity is normaly given in the original units; in cases where we have reinterpreted the original measurement, the listed value may differ from that given by the authors. The quoted uncertainty is the a priori uncertainty used as input when constructing the initial Thermochemical Network, and corresponds either to the value proposed by the original authors or to our estimate; if an additional multiplier is given in parentheses immediately after the prior uncertainty, it corresponds to the factor by which the prior uncertainty needed to be multiplied during the ATcT analysis in order to make that particular measurement consistent with the prevailing knowledge contained in the Thermochemical Network.

Contribution
(%)
TN
ID
Reaction Measured Quantity Reference
21.99488.1 999 H2S (g) + 999 O2 (g) → 728 OSO (g) + 272 S (cr,l) + 999 H2O (cr,l) ΔrH°(298.15 K) = -115042 ± 60 kcal/molKapustinskii 1958
13.49369.1 S (cr,l) O2 (g) → OSO (g) ΔrH°(298.15 K) = -296.847 ± 0.200 kJ/molEckman 1929, note SO2
9.59494.1 SH (g) → H (g) S (g) ΔrH°(0 K) = 29245 ± 25 cm-1Zhou 2005
7.29516.1 S (cr,l) + 3/2 O2 (g) H2O (cr,l) → OS(O)(OH)2 (aq, 115 H2O) ΔrH°(298.15 K) = -143.85 ± 0.06 kcal/molGood 1960, CODATA Key Vals
5.39516.2 S (cr,l) + 3/2 O2 (g) H2O (cr,l) → OS(O)(OH)2 (aq, 115 H2O) ΔrH°(298.15 K) = -143.92 ± 0.07 kcal/molMansson 1963, CODATA Key Vals
3.99496.1 SH (g) → [SH]+ (g) ΔrH°(0 K) = 84057.5 ± 3 cm-1Hsu 1994, Milan 1996, as quoted by NIST WebBook
2.99362.11 S2 (g) + 2 H2O (g) → O2 (g) + 2 H2S (g) ΔrH°(0 K) = 75.51 ± 0.25 kcal/molFeller 2008
2.99362.10 S2 (g) + 2 H2O (g) → O2 (g) + 2 H2S (g) ΔrH°(0 K) = 75.40 ± 0.25 kcal/molKarton 2006, Karton 2011
2.19354.2 S (cr,l) → S2 (g) ΔrG°(570 K) = 9.483 ± 0.138 (×1.915) kcal/molDrowart 1968, Detry 1967, 3rd Law
2.19555.1 S (cr,l) + 3/2 O2 (g) H2O (cr,l) → OS(O)(OH)2 (aq, 45 H2O) ΔrH°(298.15 K) = -143.67 ± 0.11 kcal/molMcCullough 1957a
2.19490.1 H2S (g) + 3/2 O2 (g) → OSO (g) H2O (cr,l) ΔrH°(298.15 K) = -134.24 ± 0.16 kcal/molKapustinskii 1958
1.99389.1 SO (g) → S (g) O (g) ΔrH°(0 K) = 43275 ± 5 cm-1Clerbaux 1994
1.79356.4 S2 (g) + 2 H2 (g) → 2 H2S (g) ΔrG°(1515 K) = -31.42 ± 0.80 (×1.719) kJ/molRandall 1918, Gurvich TPIS, 2nd Law
1.69354.4 S (cr,l) → S2 (g) ΔrG°(600 K) = 8.57 ± 0.29 (×1.044) kcal/molBraune 1951, West 1929, Gurvich TPIS, 3rd Law
1.49515.1 S (cr,l) + 3/2 O2 (g) H2O (cr,l) → OS(O)(OH)2 (aq, 70 H2O) ΔrH°(298.15 K) = -143.58 ± 0.09 (×1.477) kcal/molMcCullough 1953, CODATA Key Vals
1.29495.12 SH (g) → H (g) S (g) ΔrH°(0 K) = 83.69 ± 0.20 kcal/molFeller 2008
1.19471.13 H2S (g) → 2 H (g) S (g) ΔrH°(0 K) = 173.54 ± 0.20 kcal/molFeller 2008, McNeill 2022
1.19362.9 S2 (g) + 2 H2O (g) → O2 (g) + 2 H2S (g) ΔrH°(0 K) = 75.57 ± 0.40 kcal/molKarton 2011
1.09516.3 S (cr,l) + 3/2 O2 (g) H2O (cr,l) → OS(O)(OH)2 (aq, 115 H2O) ΔrH°(298.15 K) = -143.70 ± 0.07 (×2.278) kcal/molWaddington 1956, Mansson 1963, est unc
0.99514.1 OSO (g) + 1/2 O2 (g) H2O (cr,l) → OS(O)(OH)2 (cr,l) ΔrH°(298.15 K) = -231.329 ± 0.040 kJ/molNBS Tables 1989

Top 10 species with enthalpies of formation correlated to the ΔfH° of [SH]+ (g)

Please note: The correlation coefficients are obtained by renormalizing the off-diagonal elements of the covariance matrix by the corresponding variances.
The correlation coefficient is a number from -1 to 1, with 1 representing perfectly correlated species, -1 representing perfectly anti-correlated species, and 0 representing perfectly uncorrelated species.


Correlation
Coefficent
(%)
Species Name Formula Image    ΔfH°(0 K)    ΔfH°(298.15 K) Uncertainty Units Relative
Molecular
Mass
ATcT ID
98.0 SulfanylSH (g)[SH]142.81143.26± 0.18kJ/mol33.0739 ±
0.0060
13940-21-1*0
98.0 Hydrosulfide[SH]- (g)[SH-]-80.53-80.53± 0.18kJ/mol33.0745 ±
0.0060
15035-72-0*0
97.4 Hydrogen sulfideH2S (g)S-17.37-20.29± 0.18kJ/mol34.0819 ±
0.0060
7783-06-4*0
97.0 Sulfoniumyl[H2S]+ (g)[SH2+]992.66989.75± 0.18kJ/mol34.0813 ±
0.0060
26453-60-1*0
62.6 Monosulfur anionS- (g)[S-]76.4278.48± 0.14kJ/mol32.0665 ±
0.0060
14337-03-2*0
62.6 SulfurS (g)[S]276.83279.08± 0.14kJ/mol32.0660 ±
0.0060
7704-34-9*0
62.5 Monosulfur cationS+ (g)[S+]1276.421278.21± 0.14kJ/mol32.0655 ±
0.0060
14701-12-3*0
62.4 DisulfurS2 (g)S=S127.37127.68± 0.27kJ/mol64.1320 ±
0.0120
23550-45-0*0
61.5 Sulfur atom dication[S]+2 (g)[S++]3528.183531.88± 0.14kJ/mol32.0649 ±
0.0060
14127-58-3*0
60.3 Sulfur monoxideSO (g)S=O5.956.00± 0.13kJ/mol48.0654 ±
0.0060
13827-32-2*0

Most Influential reactions involving [SH]+ (g)

Please note: The list, which is based on a hat (projection) matrix analysis, is limited to no more than 20 largest influences.

Influence
Coefficient
TN
ID
Reaction Measured Quantity Reference
0.9999496.1 SH (g) → [SH]+ (g) ΔrH°(0 K) = 84057.5 ± 3 cm-1Hsu 1994, Milan 1996, as quoted by NIST WebBook
0.0009502.1 H2S (g) → H (g) [SH]+ (g) ΔrH°(0 K) = 14.300 ± 0.024 eVPrest 1983a
0.0009496.4 SH (g) → [SH]+ (g) ΔrH°(0 K) = 10.43 ± 0.03 eVMorrow 1966, Huber 1979
0.0009502.6 H2S (g) → H (g) [SH]+ (g) ΔrH°(0 K) = 14.313 ± 0.040 eVRuscic W1RO
0.0009496.3 SH (g) → [SH]+ (g) ΔrH°(0 K) = 10.45 ± 0.04 eVCheng 1998
0.0009496.11 SH (g) → [SH]+ (g) ΔrH°(0 K) = 10.411 ± 0.040 eVRuscic W1RO
0.0009502.2 H2S (g) → H (g) [SH]+ (g) ΔrH°(0 K) = 14.27 ± 0.02 (×2.594) eVDibeler 1968a
0.0009496.2 SH (g) → [SH]+ (g) ΔrH°(0 K) = 10.37 ± 0.01 (×5.187) eVDunlavey 1979
0.0009502.4 H2S (g) → H (g) [SH]+ (g) ΔrH°(0 K) = 14.253 ± 0.073 eVRuscic G4
0.0009496.8 SH (g) → [SH]+ (g) ΔrH°(0 K) = 10.387 ± 0.073 eVRuscic G4
0.0009502.5 H2S (g) → H (g) [SH]+ (g) ΔrH°(0 K) = 14.270 ± 0.099 eVRuscic CBS-n
0.0009496.7 SH (g) → [SH]+ (g) ΔrH°(0 K) = 10.350 ± 0.093 eVRuscic G3X
0.0009496.10 SH (g) → [SH]+ (g) ΔrH°(0 K) = 10.361 ± 0.099 eVRuscic CBS-n
0.0009502.3 H2S (g) → H (g) [SH]+ (g) ΔrH°(0 K) = 14.203 ± 0.093 (×1.269) eVRuscic G3X


References
1   B. Ruscic, R. E. Pinzon, M. L. Morton, G. von Laszewski, S. Bittner, S. G. Nijsure, K. A. Amin, M. Minkoff, and A. F. Wagner,
Introduction to Active Thermochemical Tables: Several "Key" Enthalpies of Formation Revisited.
J. Phys. Chem. A 108, 9979-9997 (2004) [DOI: 10.1021/jp047912y]
2   B. Ruscic, R. E. Pinzon, G. von Laszewski, D. Kodeboyina, A. Burcat, D. Leahy, D. Montoya, and A. F. Wagner,
Active Thermochemical Tables: Thermochemistry for the 21st Century.
J. Phys. Conf. Ser. 16, 561-570 (2005) [DOI: 10.1088/1742-6596/16/1/078]
3   B. Ruscic and D. H. Bross,
Active Thermochemical Tables (ATcT) values based on ver. 1.172 of the Thermochemical Network (2024); available at ATcT.anl.gov
4   K. L. Caster, N. A. Seifert, B. Ruscic, A. W. Jasper, and K. Prozument,
Dynamics of HCN, NHC, and HNCO Formation in the 193 nm Photodissociation of Formamide
J. Phys. Chem. A (in press) (2024) [DOI: 10.1021/acs.jpca.4c02232]
5   B. Ruscic,
Uncertainty Quantification in Thermochemistry, Benchmarking Electronic Structure Computations, and Active Thermochemical Tables.
Int. J. Quantum Chem. 114, 1097-1101 (2014) [DOI: 10.1002/qua.24605]
6   B. Ruscic and D. H. Bross,
Thermochemistry
Computer Aided Chem. Eng. 45, 3-114 (2019) [DOI: 10.1016/B978-0-444-64087-1.00001-2]

Formula
The aggregate state is given in parentheses following the formula, such as: g - gas-phase, cr - crystal, l - liquid, etc.

Uncertainties
The listed uncertainties correspond to estimated 95% confidence limits, as customary in thermochemistry (see, for example, Ruscic [5] and Ruscic and Bross[6]).
Note that an uncertainty of ± 0.000 kJ/mol indicates that the estimated uncertainty is < ± 0.0005 kJ/mol.

Website Functionality Credits
The reorganization of the website was developed and implemented by David H. Bross (ANL).
The find function is based on the complete Species Dictionary entries for the appropriate version of the ATcT TN.
The molecule images are rendered by Indigo-depict.
The XYZ renderings are based on Jmol: an open-source Java viewer for chemical structures in 3D. http://www.jmol.org/.

Acknowledgement
This work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences under Contract No. DE-AC02-06CH11357.