Selected ATcT [1, 2] enthalpy of formation based on version 1.140 of the Thermochemical Network [3]

This version of ATcT results[3] was generated by additional expansion of version 1.130 to fully include the highest-level electronic structure computations described in reference [4].

2-Chloro ozone anion

Formula: [ClO(O)O]- (g)

CAS RN: *141801-67-4

ATcT ID: *141801-67-4*0

SMILES: ClO([O])[O-]

InChI: InChI=1S/ClO3/c1-4(2)3/q-1

InChIKey: ATMBNUQOJZHRAE-UHFFFAOYSA-N

Hills Formula: Cl1O3-

2D Image:

Aliases: [ClO(O)O]-; 2-Chloro ozone anion; ClO(O)O-

Relative Molecular Mass: 83.4514 ± 0.0013

Δ_fH°(0 K)	Δ_fH°(298.15 K)	Uncertainty	Units
-103.6	-105.9	± 3.2	kJ/mol

3D Image of [ClO(O)O]- (g)

spin ON spin OFF

Top contributors to the provenance of Δ_fH° of [ClO(O)O]- (g)

The 11 contributors listed below account for 92.4% of the provenance of Δ_fH° of [ClO(O)O]- (g).

Please note: The list is limited to 20 most important contributors or, if less, a number sufficient to account for 90% of the provenance. The Reference acts as a further link to the relevant references and notes for the measurement. The Measured Quantity is normaly given in the original units; in cases where we have reinterpreted the original measurement, the listed value may differ from that given by the authors. The quoted uncertainty is the a priori uncertainty used as input when constructing the initial Thermochemical Network, and corresponds either to the value proposed by the original authors or to our estimate; if an additional multiplier is given in parentheses immediately after the prior uncertainty, it corresponds to the factor by which the prior uncertainty needed to be multiplied during the ATcT analysis in order to make that particular measurement consistent with the prevailing knowledge contained in the Thermochemical Network.

Contribution (%)	TN ID	Reaction	Measured Quantity	Reference
21.8	991.2	[ClO(O)O]- (g) → Cl (g) + 3 O (g)	Δ_rH°(0 K) = 229.97 ± 1.60 kcal/mol	Ruscic G4
18.9	991.1	[ClO(O)O]- (g) → Cl (g) + 3 O (g)	Δ_rH°(0 K) = 230.66 ± 1.72 kcal/mol	Ruscic G3X
8.5	993.4	[ClO(O)O]- (g) → [OCl(O)O]- (g)	Δ_rH°(0 K) = -26.84 ± 2.4 kcal/mol	Ruscic W1RO
7.7	991.4	[ClO(O)O]- (g) → Cl (g) + 3 O (g)	Δ_rH°(0 K) = 227.70 ± 1.50 (×1.795) kcal/mol	Ruscic W1RO
7.2	993.2	[ClO(O)O]- (g) → [OCl(O)O]- (g)	Δ_rH°(0 K) = -24.72 ± 2.6 kcal/mol	Ruscic G4
6.2	993.1	[ClO(O)O]- (g) → [OCl(O)O]- (g)	Δ_rH°(0 K) = -23.97 ± 2.8 kcal/mol	Ruscic G3X
5.4	992.4	ClO(O)O (g) → OCl(O)O (g)	Δ_rH°(0 K) = -19.89 ± 2.4 kcal/mol	Ruscic W1RO
4.6	992.2	ClO(O)O (g) → OCl(O)O (g)	Δ_rH°(0 K) = -15.31 ± 2.6 kcal/mol	Ruscic G4
4.5	993.3	[ClO(O)O]- (g) → [OCl(O)O]- (g)	Δ_rH°(0 K) = -21.77 ± 3.2 (×1.022) kcal/mol	Ruscic CBS-n
4.0	992.1	ClO(O)O (g) → OCl(O)O (g)	Δ_rH°(0 K) = -15.49 ± 2.8 kcal/mol	Ruscic G3X
3.0	992.3	ClO(O)O (g) → OCl(O)O (g)	Δ_rH°(0 K) = -17.47 ± 3.2 kcal/mol	Ruscic CBS-n

Top 10 species with enthalpies of formation correlated to the Δ_fH° of [ClO(O)O]- (g)

Please note: The correlation coefficients are obtained by renormalizing the off-diagonal elements of the covariance matrix by the corresponding variances.
The correlation coefficient is a number from -1 to 1, with 1 representing perfectly correlated species, -1 representing perfectly anti-correlated species, and 0 representing perfectly uncorrelated species.

Correlation Coefficent (%)	Species Name	Formula	Δ_fH°(0 K)	Δ_fH°(298.15 K)	Uncertainty	Units	Relative Molecular Mass	ATcT ID
65.3	2-Chloro ozone	ClO(O)O (g)	265.7	265.1	± 3.7	kJ/mol	83.4509 ± 0.0013	141801-66-30
13.9	Chlorate	[OCl(O)O]- (g)	-208.2	-213.7	± 1.5	kJ/mol	83.4514 ± 0.0013	14866-68-3*0
6.2	Perchloryl	OCl(O)O (g)	191.76	186.09	± 0.62	kJ/mol	83.4509 ± 0.0013	13932-10-0*0
5.9	Chloric acid	HOCl(O)O (g)	0.6	-6.5	± 1.1	kJ/mol	84.4588 ± 0.0013	7790-93-4*0
5.3	Chlorine hydride oxide	HCl(O)(O)O (g)	163.9	154.0	± 2.4	kJ/mol	84.4588 ± 0.0013	1027055-52-2*0
4.0	Chlorine dioxide	OClO (g)	101.41	98.94	± 0.29	kJ/mol	67.4515 ± 0.0011	10049-04-4*0
3.8	Peroxychlorite	[OClOO]- (g)	-34.4	-34.4	± 2.0	kJ/mol	83.4514 ± 0.0013	852472-63-0*0
3.5	Chlorite	[OClO]- (g)	-105.51	-107.69	± 0.37	kJ/mol	67.4520 ± 0.0011	14998-27-7*0
2.5	Perchloryloxy	OCl(O)(O)O (g)	248.4	240.8	± 1.8	kJ/mol	99.4503 ± 0.0015	12133-63-0*0
2.3	1-Chloro ozone anion	[ClOOO]- (g, perp)	-109.0	-111.5	± 2.2	kJ/mol	83.4514 ± 0.0013	224299-15-4*3

Most Influential reactions involving [ClO(O)O]- (g)

Please note: The list, which is based on a hat (projection) matrix analysis, is limited to no more than 20 largest influences.

Influence Coefficient	TN ID	Reaction	Measured Quantity	Reference
0.353	990.4	[ClO(O)O]- (g) → ClO(O)O (g)	Δ_rH°(0 K) = 3.860 ± 0.050 eV	Ruscic W1RO
0.237	990.2	[ClO(O)O]- (g) → ClO(O)O (g)	Δ_rH°(0 K) = 3.768 ± 0.061 eV	Ruscic G4
0.218	991.2	[ClO(O)O]- (g) → Cl (g) + 3 O (g)	Δ_rH°(0 K) = 229.97 ± 1.60 kcal/mol	Ruscic G4
0.189	991.1	[ClO(O)O]- (g) → Cl (g) + 3 O (g)	Δ_rH°(0 K) = 230.66 ± 1.72 kcal/mol	Ruscic G3X
0.122	990.1	[ClO(O)O]- (g) → ClO(O)O (g)	Δ_rH°(0 K) = 3.825 ± 0.085 eV	Ruscic G3X
0.104	993.4	[ClO(O)O]- (g) → [OCl(O)O]- (g)	Δ_rH°(0 K) = -26.84 ± 2.4 kcal/mol	Ruscic W1RO
0.104	990.3	[ClO(O)O]- (g) → ClO(O)O (g)	Δ_rH°(0 K) = 3.908 ± 0.092 eV	Ruscic CBS-n
0.089	993.2	[ClO(O)O]- (g) → [OCl(O)O]- (g)	Δ_rH°(0 K) = -24.72 ± 2.6 kcal/mol	Ruscic G4
0.077	991.4	[ClO(O)O]- (g) → Cl (g) + 3 O (g)	Δ_rH°(0 K) = 227.70 ± 1.50 (×1.795) kcal/mol	Ruscic W1RO
0.076	993.1	[ClO(O)O]- (g) → [OCl(O)O]- (g)	Δ_rH°(0 K) = -23.97 ± 2.8 kcal/mol	Ruscic G3X
0.056	993.3	[ClO(O)O]- (g) → [OCl(O)O]- (g)	Δ_rH°(0 K) = -21.77 ± 3.2 (×1.022) kcal/mol	Ruscic CBS-n

References

1		B. Ruscic, R. E. Pinzon, M. L. Morton, G. von Laszewski, S. Bittner, S. G. Nijsure, K. A. Amin, M. Minkoff, and A. F. Wagner, Introduction to Active Thermochemical Tables: Several "Key" Enthalpies of Formation Revisited. J. Phys. Chem. A 108, 9979-9997 (2004) [DOI: 10.1021/jp047912y]
2		B. Ruscic, R. E. Pinzon, G. von Laszewski, D. Kodeboyina, A. Burcat, D. Leahy, D. Montoya, and A. F. Wagner, Active Thermochemical Tables: Thermochemistry for the 21^st Century. J. Phys. Conf. Ser. 16, 561-570 (2005) [DOI: 10.1088/1742-6596/16/1/078]
3		B. Ruscic and D. H. Bross, Active Thermochemical Tables (ATcT) values based on ver. 1.140 of the Thermochemical Network (2024); available at ATcT.anl.gov
4		J. H. Thorpe, J. L. Kilburn, D. Feller, P. B. Changala, D. H. Bross, B. Ruscic, and J. F. Stanton, Elaborated Thermochemical Treatment of HF, CO, N2, and H2O: Insight into HEAT and Its Extensions J. Chem. Phys. 155, 184109 (2021) [DOI: 10.1063/5.0069322]
5		B. Ruscic, Uncertainty Quantification in Thermochemistry, Benchmarking Electronic Structure Computations, and Active Thermochemical Tables. Int. J. Quantum Chem. 114, 1097-1101 (2014) [DOI: 10.1002/qua.24605]
6		B. Ruscic and D. H. Bross, Thermochemistry Computer Aided Chem. Eng. 45, 3-114 (2019) [DOI: 10.1016/B978-0-444-64087-1.00001-2]

Formula

The aggregate state is given in parentheses following the formula, such as: g - gas-phase, cr - crystal, l - liquid, etc.

Uncertainties

The listed uncertainties correspond to estimated 95% confidence limits, as customary in thermochemistry (see, for example, Ruscic [5] and Ruscic and Bross[6]).
Note that an uncertainty of ± 0.000 kJ/mol indicates that the estimated uncertainty is < ± 0.000₅ kJ/mol.

Website Functionality Credits

The reorganization of the website was developed and implemented by David H. Bross (ANL).
The find function is based on the complete Species Dictionary entries for the appropriate version of the ATcT TN.
The molecule images are rendered by Indigo-depict.
The XYZ renderings are based on Jmol: an open-source Java viewer for chemical structures in 3D. http://www.jmol.org/.

Acknowledgement

This work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences under Contract No. DE-AC02-06CH11357.